Nordson ASYMTEK Spectrum II S2-910 | High Precision Automated Dispensing System
Nordson ASYMTEK Spectrum II S2-910 Dispensing System For Sale
Nordson ASYMTEK Spectrum II S2-910 is a high-performance automated fluid dispensing platform built for micro-volume precision dispensing in advanced electronics manufacturing. The Spectrum II series, commonly known as Asymtek S2 model S2-910, delivers repeatable dispensing accuracy for adhesives, underfill, encapsulant, and solder paste. It integrates advanced motion control and closed-loop process monitoring to meet strict requirements of automotive electronics, semiconductor packaging and SMT assembly.
What core advantages does Nordson ASYMTEK Spectrum II S2-910 have?
Ultra-precise micro-volume dispensing capability
The S2-910 supports ultra-small dot dispensing with consistent volume control. Closed-loop weight calibration minimizes fluid variation for high-mix low-volume and mass production lines.
High-speed stable motion system
Linear motor motion architecture provides fast positioning while maintaining dispensing accuracy. Reduced cycle time improves line throughput for high-density PCB and chip packaging.
Flexible fluid material compatibility
This Spectrum II dispenser works with underfill, die attach adhesive, encapsulant, solder paste, thermal interface materials and conformal coating fluids. Quick valve change reduces product changeover time.
Built-in process monitoring & traceability
On-board vision and real-time dispensing inspection record all production data. Complete traceability supports automotive and semiconductor quality compliance standards.
Compact footprint for factory layout optimization
The S2-910 saves floor space compared to larger dispensing platforms. It can be easily integrated into existing SMT or semiconductor assembly lines.
Where can the Nordson ASYMTEK Spectrum II S2-910 dispensing system be applied?
Semiconductor Chip Packaging
Underfill dispensing for flip chip, die attach and dam & fill encapsulation for IC packages.
Automotive Electronics Assembly
Dispensing for ECU, sensor modules, power device packaging with AEC-Q quality requirements.
SMT PCB Assembly
Conformal coating, adhesive dispensing for surface mount components and board protection.
Consumer Electronics Manufacturing
Precision glue dispensing for camera modules, speaker components and mini circuit boards.
Power Electronics & Battery Modules
Thermal paste dispensing and encapsulation for power modules and new energy electronic parts.
Technical Parameters
| Item | Specification |
|---|---|
| Model | Nordson ASYMTEK Spectrum II S2-910 |
| Dispensing Type | Jet dispensing / Contact dispensing |
| Minimum Dot Volume | 0.5 nL |
| Positioning Repeatability | ±10 µm |
| Max Work Area | 400 mm × 400 mm |
| Motion System | Linear motor drive |
| Vision System | On-board CCD alignment & real-time dispensing inspection |
| Supported Fluid | Underfill, die attach adhesive, encapsulant, solder paste, thermal interface material, conformal coating |
| Power Supply | 200–240 VAC, 50/60 Hz |
| Compressed Air Requirement | 0.4–0.7 MPa, clean dry air |
| Machine Footprint | 1280 mm × 1420 mm |
FAQ Guide
The dispensing system overview
Nordson ASYMTEK Spectrum II S2-910 automated dispensing system is a market-proven high precision fluid dispensing solution. With linear motor motion, multi-type valve compatibility and built-in vision inspection, the S2-910 handles micro-volume dispensing tasks for semiconductor, automotive electronics, SMT and power electronics. It balances high throughput, dispensing repeatability and full process traceability, suitable for high-reliability electronics manufacturing.
Related Other SMT Line Machine
Front-end Loading & Printing
PCB Loader
Fully Automatic Solder Paste Printer (DEK, MPM, GKG, YAMAHA)
Solder Paste Inspection (SPI)
Core Mounting
High-speed Placement Machine (YAMAHA, Fuji, Hanwha, Panasonic, JUKI)
Multi-functional Placement Machine (for IC, BGA & Special-shaped Components)
Reflow Soldering & Inspection
Reflow Oven (8 Zones / 10 Zones)
Automated Optical Inspection (AOI) (SAKI, Omron, ALeader)
X-Ray Inspector (Internal Solder Joint Inspection for BGA, QFN)
Back-end Auxiliary Equipment
PCB Unloader
Conveyor
PCB Separator (Router Type, Laser Type, Milling Cutter Type)
Vacuum Suction Loader, OK/NG Material Receiving Box
Stencil Cleaner, Solder Paste Mixer, Solder Paste Refrigeration Cabinet
Our Brand
SMTLINK specializes in the SMT‑DIP industry and offers customized SMT‑DIP equipment services for diverse requirements. Since its establishment in 2010, all products have passed multiple quality inspections for reliable performance.
Our products are well‑sold across provinces and cities in China as well as numerous overseas countries, earning wide recognition from customers.
The company has built a comprehensive after‑sales system. A professional technical team responds promptly to requests, providing on‑site installation, commissioning, fault repair and long‑term technical consultation to guarantee stable production in all respects.
Contact Us：
www.smtlink.asia
Email：smtlink01@163.com
Tel：+8615986684956（Huang）
