NB168H Series Full Standalone Insertion Machine
Product Introduction The NB168H series is an integrated through-hole component inserter that can operate independently without auxiliary frames, suitable for vertical capacitors and diodes. It delivers high precision and stable operation to reduce labor cost, ideal for mass production of circuit boards in home appliances, industry and new energy sectors
Product Introduction
The NB168H series is an integrated through-hole component inserter that can operate independently without auxiliary frames, suitable for vertical capacitors and diodes. It delivers high precision and stable operation to reduce labor cost, ideal for mass production of circuit boards in home appliances, industry and new energy sectors with complete after-sales support.
IPRODUCT FEATURES
- The unit runs independently without auxiliary frames and occupies small space
- High-speed and precise insertion for vertical components with stable yield rate
- High automation greatly saves labor, suitable for mass production in multiple industries
- Stable structure, low failure rate in continuous production and easy maintenance
Features
- The machine can operate independently on the ground without supporting racks, featuring flexible deployment and compact footprint.
- It achieves high-speed, accurate insertion of vertical components with high consistency and lower defect rate.
- Fully automatic operation replaces manual work to cut labor costs and maintain stable and controllable production capacity.
- Robust mechanical structure ensures low failure rate during continuous mass production with easy maintenance.
Technical paramete
| item | Content |
| Power Supply | Rated voltage:3 3-phase380V±20V |
| Frequency:50/60Hz | |
| Rated capacity: Approx.3.5KVA | |
| Air supply | Supplied air pressure: Min.0.45 Mpa-Max.0.8Mpa ( Operation air pressure0.45MPa~0.5MPa) |
| Supplied air mass: Approx.110L/min.(A.N.R) | |
| Dimensions | NB168H Series: W:2134mm, D:1815mm, H:1600mm ( Not including signal towe) |
| Mass | Host weight:Approx.2,000kg( Main body only) |
| Environmental requirements | Ambient temperature:20°C土10°C |
| Operating controls | Interactive operation via color LCD touch screen. |
| I/O functions:U盘 :USB Slot (standard equipment) | |
| Communication:LAN LAN communication(TCP/IP) | |
| Color | Standard color: White+blue |
| Insertion tact time | Maxtact time: Approx.0.14s/point(0.168,0.20,0.25,0.30s/point changeable |
| Applicable components | Heigh: Hn=Max.23mm ( 26mm. Special specificationup to 26mm) |
| Diameter: D=Max.13mm | |
| Resistors,electrolytic capacitors,ceramic capacitors,LEDs,transistors,filters and resistor networks | |
| PCB replacement time | Approx.3~4 seconds |
| Applicable PCB | Dimensions: Min.50mmx50mm~ Max.508mmx381mm |
| Allowable insertion area: Min.50mmx40mm~ Max.500mmx375mm | |
| Thickness:1.6mm+0.15mm ( forstandard specificaton) Min.0.6mm~ Max2 0mm (Spedial specification） | |
| Mass: Max.1kg per board including inserted components. | |
| Flow direction: right->left ( Standard)、 left-right ( Option) | |
| Board positioning method: Pin positioning or Edge positioning | |
| Board transfer: Single PCB transfer (Standard) Double PCB transfer ( Special specification) | |
| Insertion direction | 360 degrees by 1degree |
| Anvil | Lead bending angle 30±15°3 Lead bending dimensions1.540.3mm Cutting&Clinch type system (Piezoelectric detection system) |
| No.of component inputs | 40inputs 20 inputs for standard specification, others are requested by customers) |
| Control system | Microcomputer system |
| Programming method | X-Yaxes: Absolute coordinate commands |
| Insertion pitch: Absolute commands | |
| Component feeder: Feeder number designation | |
| Command increment of X-Y table | 0.01mm/Pulse |
| Program | Number of NC programs |
| Built-in flash memory 2000个2000 prograrms | |
| Depending on USB disk memory | |
| Indication light | Signal tower (3 lamps,top to bottom: red/yellow/green) |
| Hole position offset | Determines optimuminsertion positions based on the recognition of allinsertion positions to make positional corrections (Y correction). |
| Recovery | Auto recovery/ Autorecovery(Estimated Auto-recovery Time Approx.12s) |
| Self-diagnosis functior | Presents onthe colorLCD the machine status when the power is ON and situation of any troubles occurred, as well as countermeasures against the troubles |
Application Fields
- Mass production of household electronic circuit boards
- Processing of industrial control and power supply boards
- Circuit board manufacturing for new energy charging piles and power equipment
- Component insertion for security, communication and consumer electronics
Customer reviews
The NB168H series has received unanimous praise from customers. The equipment offers high working efficiency and simple operation, significantly reducing costs and increasing productivity. It runs stably with a high yield rate and boasts low maintenance costs, giving users peace of mind. Our after-sales team responds promptly with comprehensive service, ensuring worry-free operation throughout – making us a trusted long-term partner.
Product Overview
SMTLINK NB168H Fully Automatic Stand-alone Insertion Machine delivers high speed and high precision, catering to the insertion needs of multiple industries. Our equipment is well-sold both domestically and internationally, offering competitive pricing to help you reduce costs and improve efficiency. With a comprehensive after-sales service system, we ensure worry-free production line operation. Quality choice, service first – SMTLINK is your trusted partner!
Contact Us：
www.smtlink.asia
Email：smtlink01@163.com
Tel：+8615986684956（He）
