PBT-550S | Camera module cleaning machine
Application Precision cleaning of camera modules, CIS/CMOS sensors, wafers, BGAs and advanced packages before bonding or under-fill; ideal for clean-room lines that require RoHS-compliant ultra-pure-water only.
Application
Precision cleaning of camera modules, CIS/CMOS sensors, wafers, BGAs and advanced packages before bonding or under-fill; ideal for clean-room lines that require RoHS-compliant ultra-pure-water only.
Key Features
- Interchangeable product-specific fixtures (one-click swap).
- Two-fluid micron spray: high cleanliness, zero mechanical damage, minimal DI consumption.
- Spin-spray avoids re-contamination; centrifugal drying gives < 1 % water residue.
- In-chamber ionizer + heated walls for rapid spot-free drying.
- Dual-stage air filtration (1 µm + 0.01 µm) meets ISO 8573-1; 0.3 µm HEPA on exhaust.
- Space-saving 923 mm width; full stainless-steel body, acid/alkali resistant, mirror finish for easy wipe-down.
Specifications
| Model | PBT-550S |
| External dimensions | 1 080 mm (L) × 923 mm (W) × 1 820 mm (H) |
| Cleaning fixture | Custom; disk Ø < 550 mm |
| Cleaning method | Two-fluid (liquid + air) spray |
| Drying method | High-speed centrifugal spin |
| Power supply | AC 380 V, 50 Hz |
| Rated / total power | 5 kW / 7 kW |
| Power consumption | 3.5 kWh (wash) / 1 kWh (stand-by) |
| Transmission motor | 3 HP |
| Centrifugal speed | 100 – 1 500 rpm |
| Pure-water consumption | ≤ 10 L/min |
| Pure-water supply | > 7 L/min, resistivity > 17 MΩ·cm |
| Liquid pressure | 3 – 8 kgf/cm² |
| Air pressure | 0.2 – 0.5 MPa (process); 0.45 – 0.7 MPa (plant supply) |
| Air consumption | 10 – 30 m³/h |
| Air filtration | 1 µm + 0.01 µm stages |
| Ambient filtration | 0.3 µm HEPA, 99.999 % |
| Pure-water inlet | 12 mm hose or PT ½” female |
| Air inlet | 12 mm tube |
| Drain port | PT 1″ female |
| Exhaust port | 4 × Ø2″ |
| Net weight | ≈ 450 kg |
