Yamaha YSM10 SMT Pick and Place Machine
Yamaha YSM10 SMT Pick and Place Machine for Sale
For manufacturers that need more placement capacity without moving to a large, complex SMT platform, the Yamaha YSM10 offers a practical balance between speed, footprint and component flexibility.
This compact modular mounter handles everyday chip placement as well as larger ICs and odd-shaped components within a single machine platform. Depending on the production mix, it can be used as the main placement machine in a compact SMT line or added to an existing line where more placement capacity is required.
SMTLINK supplies pre-owned Yamaha YSM10 machines for PCB assembly and EMS production. Available machines may differ in manufacturing year, head configuration, feeder setup, software version and overall condition, so each quotation should be based on the actual unit available rather than a generic machine description.
Looking for a Yamaha YSM10? Contact us for current machine photos, configuration, condition, available accessories and quotation.
Why the Yamaha YSM10 Is Still Worth Considering
The YSM10 is no longer a current-production Yamaha model, but that does not automatically make it unsuitable for production.
The machine fits the actual product mix, required output, available floor space, existing feeder inventory and investment budget.
Its compact single-beam platform provides up to 46,000 CPH under Yamaha-defined optimum conditions while covering a component range from ultra-small chips to components as large as 55 × 100 mm. Instead of dedicating the machine only to small chip components, manufacturers can use it for a wider mix of placement work.
For an EMS factory handling frequent product changeovers, a PCB assembly company adding capacity, or a manufacturer already operating Yamaha equipment, a well-maintained used YSM10 can therefore remain a practical production asset.
One Placement Platform for a Wide Component Mix
One of the practical advantages of the YSM10 is the range of work that can be handled without turning the machine into a highly specialized placement station.
The HM placement head is designed for both speed and component flexibility. The standard 10-nozzle configuration is suited to higher-throughput production, while the HM5 configuration provides another option for production environments where maximum chip speed is not the only priority.
A typical PCB may combine small resistors and capacitors with ICs, connectors, BGA devices and larger components. A placement machine that covers more of that mix can simplify line planning and reduce the need to divide work across several different platforms.
The YSM10 supports components from 03015 mm up to 55 × 100 mm, with component height up to 15 mm according to machine configuration and recognition requirements.
Yamaha YSM10 Specifications
| Item | Specification |
| Model | Yamaha YSM10 |
| Machine Type | Compact Modular SMT Mounter |
| PCB Size | 50 × 50 mm to 510 × 460 mm |
| Optional Long PCB | Up to 950 mm |
| Component Range | 03015 mm to 55 × 100 mm |
| Maximum Component Height | 15 mm |
| HM Head Speed | Up to 46,000 CPH |
| HM5 Head Speed | Up to 31,000 CPH |
| Placement Accuracy | ±0.035 mm |
| Component Types | Max. 96 types, based on 8 mm feeder conversion |
| Tray Capacity | Up to 15 types with applicable tray system |
| Power Supply | 3-phase AC 200/208/220/240/380/400/416 V ±10%, 50/60 Hz |
| Air Supply | 0.45 MPa or higher, clean and dry air |
| Dimensions | 1,254 × 1,440 × 1,445 mm |
| Weight | Approx. 1,270 kg |
Buying a Used Yamaha YSM10: What Matters Most?
Manufacturing Year and Serial Number
Ask for the machine nameplate rather than relying only on a seller’s description. The nameplate helps identify the actual unit being offered.
Placement Head Configuration
Confirm whether the machine uses the HM or HM5 configuration and whether that configuration matches your required production capacity.
Camera Configuration
If your product contains larger, taller or more complex components, verify that the installed recognition system is suitable.
Feeder Requirement
A placement machine without the correct feeder package may not be ready for production.
Check how many 8 mm, 12 mm, 16 mm, 24 mm or wider feeders are needed according to your BOM instead of simply purchasing an arbitrary feeder quantity.
Nozzles
Different component packages require different nozzles. Confirm the nozzle package according to the components you actually intend to place.
Software and Machine Startup
Verify that the machine can start normally and that the control system, software and machine communication are functioning.
Mechanical Condition
Pay attention to head movement, conveyor operation, feeder interface, moving axes and abnormal noise rather than judging condition only from exterior appearance.
Maintenance and Replacement Parts
For an older SMT machine, future support is part of the purchase cost. Availability of feeders, nozzles, sensors, motors, cameras and other service parts should be considered before the machine enters production.
Building an SMT Line Around the YSM10
A typical SMT production line may include:
PCB Loader → Solder Paste Printer → SPI → Yamaha YSM10 → AOI → Reflow Oven → PCB Unloader
The exact configuration depends on the product.
A simple line may not require every machine listed above, while a higher-quality or higher-volume process may require additional inspection, traceability, buffer and handling equipment.
When designing a complete line, placement capacity also needs to be balanced with printing, inspection and reflow capacity. Installing a faster mounter does not automatically increase factory output if another process becomes the bottleneck.
SMTLINK can configure complete SMT production lines around the customer’s PCB, component mix, production target, available factory space and investment range.
Before Requesting a Yamaha YSM10 Quotation
Providing a little production information usually results in a much more useful quotation.
If possible, send us:
- PCB dimensions
- Component BOM
- Smallest component package
- Largest component dimensions and height
- Approximate number of placements per PCB
- Required boards per hour or daily production
- Required feeder quantities
- Whether you need only the YSM10 or a complete SMT line
- Destination country
- Any preferred machine year or configuration
If these details are not yet available, tell us what product you plan to manufacture and your expected production volume. We can start from there.
Yamaha YSM10 FAQ guide
Our Brand
SMTLINK specializes in the SMT‑DIP industry and offers customized SMT‑DIP equipment services for diverse requirements. Since its establishment in 2010, all products have passed multiple quality inspections for reliable performance.
Our products are well‑sold across provinces and cities in China as well as numerous overseas countries, earning wide recognition from customers.
The compny has built a comprehensive after‑sales system. A professional technical team responds promptly to requests, providing on‑site installation, commissioning, fault repair and long‑term technical consultation to guarantee stable production in all respects.
Contact US：
- Address: SHENZHEN,XINTIAN
- Email: smtlink01@163.com
- Mobile: +86 15986684956(Huang)
